Warning Messages - Ricoh RDC-5000 Operation Manual

Ricoh operation manual digital camera rdc-5000
Hide thumbs Also See for RDC-5000:
Table of Contents

Advertisement

• All items of information are shown for illustration purposes. During actual
Note
camera operation, only the relevant items are displayed.
• The camera will switch off automatically (auto power-off) to conserve the
battery if it is left idle (no buttons, switches or other controls operated) for
about 5 minutes. To resume use, turn the camera on again.
• You can disable the auto power-off feature (p.103).
• The auto power-off mode does not function when the camera is powered
by an AC adapter.

Warning Messages

If any of the warning messages listed below appears on the camera's LCD monitor,
read the corresponding explanation and take the corrective action suggested.
Warning
Status
Message
Lit
NO CARD
Flashing
WRITE
Flashing
PROTECTED
FILE
Flashing
PROTECTED
NO IMAGE
Lit
UNMATCHED
Flashing
FILE
FILE
Flashing
NUMBER
OVER
SET
Flashing
DATE/TIME
Explanation and Remedy
Indicates low batteries. Have
replacement batteries ready.
A SmartMedia memory card is out of
position. Mount a SmartMedia
memory card.
A write-protected SmartMedia memory
card is found. Remove the write
protection label from the card to gain
access to it.
You attempted to erase a protected
file. Unprotect the file before erasing
it.
There are no files to play. Mount a
SmartMedia memory card having files
recorded on it.
You attempted to play an unplayable
file.
No more files can be recorded.
Format the internal memory or insert a
new SmartMedia memory card to
continue recording.
The date has not been set. Set the
date before starting operations with
the camera.
Reference
Page
P. (27)
P. (32)
P. (31)
P. (87)
P. (32)
P. (82)
P. (32, 107)
P. (35)
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents