Setting Exposure Compensation
Starting setting
Press the EV (+/–) button on the remote control unit.
Setting the exposure compensation level
Set the exposure compensation level using the FWD ( △ ) or REV ( ▽ )
button and press the ENTER button on the remote control unit. And then
press the RELEASE button to take a picture.
Canceling the setting
Set the exposure compensation level to ±0.0.
Shooting in Manual Focus Mode
Entering the mode
Press the ERASE button on the remote control unit.
Focusing
Focus on the subject using the FWD ( △ ) or REV ( ▽ ) button. Press the
RELEASE button to take a picture.
Canceling the mode setting
Press the ERASE button again.
Playing
Use the remote control unit to playback recorded files.
q Set the mode dial to [
CARD/IN button to select a recording
destination.
The most recently recorded file will be played
back.
See
"Playback Display" (p.80)
w Choose a file by pressing the FWD ( △ )
or REV ( ▽ ) button on the remote
control unit.
Note
• The remote control unit buttons are
operated in the same way as the
buttons on the camera.
] and press the
R E L E ASE
ERASE
F WD
PROGR AM
E V
ENTER
RE V
MULTI
113
5