Table of Contents
Advertisement
2.3 System Configuration
Figure 2.1 System configuration
Products (1) and (2) shown in Figure 2.1 are included with this product. Get (3) and (4) in Figure 2.1
separately.
(1) Pod probe (M30220T-PRB)
(2) Pitch converter board for 144-pin 0.5mm-pitch LQFP (FLX-144NSD)
(3) Pitch converter board for 144-pin 0.4mm-pitch TQFP (FLX-144NSE)
(4) Pitch converter board for 120-pin 0.4mm-pitch LQFP (FLX-120NSE)
For details on the connection, refer to "3.4 Connecting the Target System" (page 17).
This pod probe is equipped with the evaluation MCUs M30220GP-EVA and M30220GP-PORT.
Board for connecting the pod probe to the 144-pin 0.5mm-pitch LQFP foot pattern on the target
system.
Board for connecting the pod probe to the foot pattern for 144-pin 0.4mm-pitch TQFP on the
target system.
Board for connecting the pod probe to the foot pattern for 120-pin 0.4mm-pitch LQFP on the
target system.
( 11 / 36 )
Advertisement
Table of Contents
