Making An Mcu File For M3T-Pd30 - Renesas M30220T-PRB User Manual

3.5 Making an MCU File for M3T-PD30

It is necessary to change the contents of the MCU file according to the MCU to be developed. Make
the MCU file in the directory same as emulator debugger M3T-PD30 (M30220.MCU for M30220
Group MCU and M30221.MCU for M30221 Group MCU).
The contents of the MCU file (the SFR area, internal RAM area, internal ROM area, the name of
firmware file) are shown below. Change the settings according to the MCU to be debugged. Use your
editor for modifying the MCU file.
The contents of the MCU file are as follows:
(1) For M30220 Group (M30220.MCU)
(2) For M30221 Group (M30221.MCU)
0 : SFR area
3FF :
400 : Internal RAM
1BFF :
E8000 : Internal ROM
FFFFF :
M30620B : Name of firmware file (Do not change)
0 : Expansion No.
0 : SFR area
3FF :
400 : Internal RAM
9FF :
FA000 : Internal ROM
FFFFF :
M30620B : Name of firmware file (Do not change)
0 : Expansion No.
Start address
End address
Start address
End address
Start address
End address
M3T-PD30 V.4.00 or later required (Do not change)
Start address
End address
Start address
End address
Start address
End address
M3T-PD30 V.400 or later required (Do not change)
( 21 / 36 )