5
(2) From the "C:¥WorkSpace¥test¥HardwareSetup" directory to which you copied hardware setup files, add the files
listed below.
Files to add : "bsc_cs0c.c", "bscsdram.c", "cache.c", "cpg.c", "dbsct.c", "hwsetup.c", "intprg.c", "lowsrc.c",
"resetprg.c", "sbrk.c", "siochar.c", "siorw.c", "vecttbl.c"
(Select the Relative Path check box)
Look in:
File name:
Files of type:
Select the
Relative
Path check
(3) Check to see that the files have been added as shown below.
Rev. 1.01 May 7, 2008
REJ11J0015-0101
Creating and Running a New Project Workspace
Figure 5.3.4 Setting Up to Add Files (2)
Figure 5.3.5 Setting Up to Add Files (3)
5.3.3 Adding Hardware Setup Files
5-12