Renesas M3A-HS71 Installation Manual page 56

Cpu board renesas 32-bit risc microcomputers superh risc engine family/sh7670 series
Hide thumbs Also See for M3A-HS71:
Table of Contents

Advertisement

4
(6) Running the program
To execute the program, select "Go" from the Debug menu (See Figure 4.1.19).
If the sample software is downloaded normally, LED7 on the SH7670 CPU board lights up and goes out alternately at
approximately one-second intervals.
Note: The contents of "resetprg.c" can be different according to the sample software version. If an error occurs or
unable to operate correctly or the software does not operate correctly, the hardware or software may not have
been set up correctly. Check the setup procedures in Chapters 2 and 3.
Rev. 1.01 May 7, 2008
REJ11J0015-0101
Figure 4.1.19 Running the Program
Running the Software
4.1.4 Sample Software Download Procedure
4.1.4
Sample Software Download Procedure
are
4-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sh7670

Table of Contents