3
(2) Figure 3.1.2 is displayed, and click "Next".
Note: If you have already installed a HEW on your PC, you can select "Install a new High-performance Embedded
Workshop" and install a new HEW in another directory on your PC.
(3) Continue to install following the instructions in the installation window.
(4) Next, install an Autoupdate Utility. Click "Next".
Note: When you have not selected "Autoupdate" on the Choice of an installation product, the above dialog is not
displayed.
Rev. 1.01 May 7, 2008
REJ11J0015-0101
Figure 3.1.2 HEW Installation Procedure (2)
Figure 3.1.3 HEW Installation Procedure (4)
Setting Up the Software
3.1 About the HEW
3-3