3
(5) Next, install an Autoupdate Utility. Click "Next".
Note: When you have not selected "Autoupdate" on the Choice of an installation product, the above dialog is not
displayed.
(6) When the installation is complete, the dialog shown in Figure 3.2.6 is displayed. Click "Finish".
Rev. 1.01 May 7, 2008
REJ11J0015-0101
Figure 3.2.5 E10A-USB Software Installation Procedure (5)
Figure 3.2.6 E10A-USB Software Installation Procedure (6)
Setting Up the Software
3.2.1 E10A-USB Software Installation Procedure
3-7