Extension Connectors (J9-J13) - Renesas M3A-HS49 User Manual

3

3.1.6 Extension Connectors (J9-J13)

The M3A-HS49 includes extension connectors to which the I/O pins of the SH7149 are connected.
MIL Standard connectors can be connected to J9-J13, allowing the user to create extension board or monitor the
SH7149 bus signals.
The bus signals of SH7149 are connected to the terminal connector J10 (J13) through J9 (J12). There are J9 and
J12 for measuring the signals by measuring instrument. When an extension board is made, J10 and J13 of the
terminal connector are recommended to be used to prevent the waveform being distorted because of the reflection of
the signal.
Figure3.1.8 shows a pin assignment of extension connector.
Board edge
19
1
Board edge
Rev.1.0 Dec 15, 2006
REJ10J0917-0100
40
39
20
20
19
J12
J11
J9
20
2
19
40
39
Figure3.1.8 Pin Assignment of Extension Connectors (J9-J13)
Operational Specifications
3.1.6 Extension Connectors (J9-J13)
2
1
J13
2
1
2
1
J10
2
1
Top view of the
solder side
3-10