Union Community UBio-X Iris User Manual page 62

UBio-X Iris User Guide
3.8.5. Message display time
If you select the [Display]  [Message display time] in the main menu, the following
window appears.
Click [OK] button to apply the set value, and click [BACK] button to cancel and return.
3.9. Terminal Info
3.9.1. System
If you select the [Terminal info]  [System] in the main menu, the following window
appears.
Click [BACK] button to finish the inquiry and move to the previous menu. Click the
menu on the left side to inquire additional item.
▶Basic setting: Same with the window at
the left side.
▶Message Display (ms)
It sets the time that the authentication
window is displayed.
0~5000 is available for the value, and
the authentication
appeared and disappear
duration.
Because it is set in millisecond, if you
want to set 2 seconds, you should set
2000.
▶System info
The hardware and firmware version of
terminal is shown.
▶Disk (using size / Total size)
It shows the using size of the hard disk.
If the using size
represented in red.
▶Ram (using size / Total size)
The using size of RAM among the all
size is represented.
If the using size
represented in red.
62
result window
for the
is high, it is
is high, it is