Union Community UBio-X Iris User Manual page 35

UBio-X Iris User Guide
3.3.1.8. Auth type
※※ In case of authentication method, if it is not set, the authentication methods are set
as [OR] combination automatically with the current registered authentication methods.
(However, 3 of authentication methods can be selected and 2 of OR combination with
password can be limited for maximum.)
3.3.1.9. Save
Click the [Save] button to save when all the registration procedure is finished. At this
point, if you click [Cancel] or [BACK] button to return, the user is not saved.
Next is the LCD messages which can appear at the registration procedure.
Set by clicking [Auth type] at the [Add
User] window. (But, it can be set when
there are more than 2 authentication
methods registered)
Click [BACK] button to cancel and return.
This shows all the authentication methods
already registered, and the buttons at the
lower side shows the buttons [OR] /
[AND] which can
selected authentication method is displayed
by blue and the registered or non-used
authentication method does by gray.
If you click the
authentication method is changed and the
screen moves to the previous window.
The authentication
represented as follows.
: Fingerprint
: Card
When you click the [Save] button,
the case that the user is successfully
registered
35
be selected. The
[OK] button, the
method icons are
: Iris
: Password