Union Community UBio-X Iris User Manual page 34

UBio-X Iris User Guide
3.3.1.7. Authentication option
▶'FP Level' (Basic setting: '0')
It decides the fingerprint authentication
level of each user, and the registered
users can have different authentication
level by modifying this value. If you set
'0', the authentication uses the level of
fingerprint authentication.
For example, if you select the '1' for FP
Level, this user will be applied with "1"
on 1:1 FP Level.
But if you select '0' for this level, the
user will be applied with the 1:1 FP Level
set from [System] -> [Finger].
▶'Enable FP 1:N' (Basic setting: If the
fingerprint is registered, [v])
If this option is checked, you can
authorize only with fingerprint without
user ID or card
▶'Enable Iris 1:N' (Basic setting: If the iris
is registered, [v]). If this option is checked,
you can authorize only with iris without
user ID or card.
34