Function Description - Philio PAT15 Quick Start Manual

CAUTION
– replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types);
– disposal of a battery into fire or a hot oven, or mechanically crushing
or cutting of a battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of
flammable liquid or gas;
– a battery subjected to extremely low air pressure that may result in
an explosion or the leakage of flammable liquid or gas
The marking information is located at the bottom of the apparatus.
Overview
Add to/Remove from Z-Wave
There are one tamper keys in the back side of the device, It can add,
remove, reset or association from the Z-Wave
In the first time, add the device into the Z-Wave
make sure the primary controller is in the add mode. And then power
on the device, just take out the insulation Mylar in the back side of the
device. The device will auto start the SmartStart Include mode.
Notice: Including a node ID allocated by Z-Wave
"Add" or "Inclusion". Excluding a node ID allocated by Z-Wave
Controller means "Remove" or "Exclusion".
Description
Function
1. Have Z-Wave
2. Pressing the tamper key three times within 1.5
Add seconds to enter the inclusion mode.
3. After add successful, the LED will light ON 1
second.
1. Have Z-Wave
2. Pressing tamper key three times within 1.5 seconds
Remove
to enter the exclusion mode.
3. Node ID has been excluded.
Reset
Notice: Use this procedure only in the event
that the primary controller is lost or
otherwise inoperable.
1. Pressing tamper key four times within 1.5 seconds
and do not release the tamper key in the 4
pressed, and the LED will light ON.
2. After 3 seconds the LED will turn OFF, after that
within 2 seconds, release the tamper key. If
successful, the LED will light ON one second.
Otherwise, the LED will flash once.
3
TM Network
TM network.
TM network. First,
TM Controller means
TM Controller entered inclusion mode.
TM Controller entered exclusion mode.
TM
th