Philio PAT15 Quick Start Manual

Flood Water Sensor PAT15
The flood sensor PAT15 has flood, based on Z-Wave
It is the Z-Wave TM plus product, it support the security, OTA... Those
newest features of the Z-Wave
communication protocol designed for home automation, specifically to
remotely control applications in residential and light commercial
environments. The technology uses a low-power RF radio embedded or
retrofitted into home electronics devices and systems, such as lighting,
home access control, entertainment systems and household appliances.
This product can be included and operated in any Z-Wave
with other Z-Wave TM certified devices from other manufacturers and/or
other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the
network.
TM technology.
TM technology. Z-Wave TM is a wireless
The device adopt the Z-Wave
network system is all made by Z-Wave
network system will have the advantages as below.
Concurrent multi-channel support reduces external interference.
•
Better RF range, improve about 10 meters in indoor.
•
Support 100 Kbps transmit speed, speed up communication.
•
Specification
Rated
Battery life
RF distance
RF Frequency
RF Maximum Power
Dimension
Location
Operation temperature -20
Humidity
FCC ID
Specifications are subject to change and improvement without notice.

Indication of battery life : Flood Alarm Report:1 times/month, Auto

Report: 4 times/ Day, Auto Wake up 1 time/ Day.
Troubleshooting
TM network
Symptom
The device can not
join to Z-Wave™
network
1
TM 700 series chip, when your Z-Wave
TM 700 series devices. The
3VDC (CR123A lithium battery)
20 years
Min. 40M indoor,
100M outdoor line of sight,
868.40 MHz, 869.85 MHz(EU)
908.40 MHz, 916.00 MHz(US)
920.9MHz, 921.7MHz, 923.1MHz
(TW/KR/Thai/SG)
+10dBm (Peak), -10dBm (Average)
85(L)x28(W)x23(H)mm
indoor use only
o C to 50 o C
85%RH max
RHHPAT15
Cause of Failure Recommendation
The device may in a Z- Exclude the device
Wave™ network. then include again.
TM