Table of Contents
Advertisement
Remove the drive by pressing the release button [1] to release the drive lever and then,
2.
rotate the lever open and, grasping the drive body, slide the drive out of the storage shelf
[2] as shown in the following figure.
Install the replacement drive by opening the drive lever on the replacement drive. Slide
3.
the new drive into the drive slot [1] until it engages with the backplane connector and then
close the lever to fully seat the drive and lock it into place [2] as shown in the following
figure.
Check that the drive is locked in place and flush with the other drives.
Oracle Database Appliance X9-2-HA Storage Shelf Hot Pluggable Components
Chapter 3
3-11
Advertisement
Table of Contents
