Table of Contents
Advertisement
storage shelf configuration, there can be up to eighteen expansion slots. These slots are
labeled 6-23 as seen from the front of the system (callouts 6 through 23 in the following
illustration).
•
Upgrade options:
–
For a high performance shelf, you can add up to eighteen 7.68 TB SSDs (available
in six-packs). You can add storage with the system running and use the appliance
CLI software commands to expand the storage configuration.
–
For a high capacity shelf, you can add eighteen 18 TB HDDs (available in an
eighteen-pack). You must power off the appliance, add storage, then re-image and
redeploy the appliance software. This is required to reconfigure the appliance from
the default high performance mode to high capacity mode.
•
Expanding the base configuration storage shelf with 7.68 TB SSDs for high
performance. The base configuration has slots 0-5 with 7.68 TB drives for DATA/RECO.
Expansion SSDs are available in six-packs and are populated in shelf storage slots from
the bottom up to also be used for DATA/RECO, as follows:
–
The first six expansion drives go into slots 6-11.
–
The second six expansion drives go into slots 12-17.
–
The third six expansion drives go into slots 18-23.
The following illustration shows the expanded drive configuration for 7.68 TB SSDs.
Oracle Database Appliance X9-2-HA Storage Shelf Hot Pluggable Components
Chapter 3
3-7
Advertisement
Table of Contents
