Vehicle Connections - Directechs DB3 Installation Manual

Vehicle connections

The connection information listed below is specific to the 2004 Toyota Camry. Refer to "Pre-installation and application warnings" for a list of important notes.
Data 14-pin blue connector (H1)
Module
Conn./Pin Color
H1/1 Light Green
H1/2 Violet/Yellow
H1/3 Tan/Black
H1/4 Tan
H1/5 Orange/Green
H1/6 Orange/Brown
H1/7 Brown
H1/8 Yellow
H1/9 Orange/Yellow
H1/10 Orange/Red
H1/11 Yellow/Red
H1/12 Brown/Red
H1/13 Red
H1/14 Black
Output 12-pin red connector (H2)
Module
Conn./Pin Color
H2/1 Black/White
H2/2 Green/Black
H2/3 Green/White
H2/4 Red/Black
H2/5 Violet/White
H2/6 Gray
H2/7 Gray/Black
H2/8 Violet/Green
H2/9 Violet/Brown
H2/10 Yellow/Black
H2/11 Orange/Black
H2/12 Blue/Red
Input 10-pin black connector (H3)
Module
Conn./Pin Color
9 403.TL11 1.15 2004 Toyota Camry
©2022 VOXX•DEI LLC. All rights reserved.
Description
No Connection
No Connection
(DATA) HS CAN High
(DATA) HS CAN Low
No Connection
No Connection
Relay N.O. (-) Ground
[3]
Relay COM. (-) Keysense Output
Relay N.C. No Connection
Relay N.C. No Connection
Relay COM No Connection
Relay N.O. No Connection
(+) W2W Only - (+) 12 Volt Input
(-) W2W Only - Ground
Description
(-) W2W Only - E-Brake Output
No Connection
(-) W2W Only - Door Output
(-) W2W Only - Trunk Output
[1]
(AC) W2W Only - Tach Output
(+) W2W Only - Brake Output
No Connection
No Connection
No Connection
(Data) Immo Data
(Data) Immo Data
(-) W2W Only - Hood Output
Description
Connects To
Wire Location
No Connection
No Connection
No Connection
No Connection
No Connection
No Connection
key switch, white 2 pin plug, pin 2
No Connection
No Connection
No Connection
No Connection
ignition switch, white 8 pin plug, pin 7
Connects To
Wire Location
Remote Starter
No Connection
Remote Starter
Remote Starter
Remote Starter
Remote Starter
No Connection
No Connection
No Connection
Transponder Key Amplifier on ignition switch, black 7 pin plug, pin 5
Transponder Key Amplifier on ignition switch, black 7 pin plug, pin 4
Remote Starter
Connects To
Wire Location
(+/-) Wire Color
(chassis ground)
- blue
+ white/red (30A)
(chassis ground)
(+/-) Wire Color
data blue/yellow
data green/white
(+/-) Wire Color