Download
Share
Print this page
Directechs DIRECTWIRE DB3 Installation Manual
  1. Manuals
  2. Brands
  3. Directechs Manuals
  4. Automobile Accessories
  5. DB3
  6. Installation manual

Directechs DIRECTWIRE DB3 Installation Manual

For 2022 toyota rav4 hybrid
Hide thumbs Also See for DIRECTWIRE DB3:

Advertisement

Quick Links

Download this manual
Functions compatible with the 2022 Toyota RAV4 Hybrid
3x LOCK START (Start control using OEM Remote)
3x LOCK STOP (Stop control using OEM Remote)
Accessory Activation
Arm Factory Security
Auto Headlamp Shutoff
Brake Status (foot brake)
Control of aftermarket alarm with OEM remote
Disarm Factory Security
Door Lock Control
Door Locks Status
Door Unlock
Driver Priority Unlock
DS4+/DS3+/VSM3 Only
E-Brake Status
Entry Monitoring ALL Door Pins
Entry Monitoring Hood Pin
Entry Monitoring Trunk/Hatch Pin
Factory Alarm Trigger Monitoring
Fuel level/EV battery level
Ignition Activation
Ignition Status
Immobilizer Bypass-Data No Key Req'd
Key2GO
Parking Lights Control
Remote Start Ready
Remote Start Takeover
Sliding Door Control Driver
Sliding Door Control Passenger
SmartStart
Start (Crank) Activation
Starter / Ignition Interrupt
Tach / RPM Output
Trunk / Hatch Release
403.TL16
v1.08
2022 Toyota RAV4 Hybrid

Advertisement

loading
Need help?

Need help?

Do you have a question about the DIRECTWIRE DB3 and is the answer not in the manual?

Questions and answers

Related Manuals for Directechs DIRECTWIRE DB3

Summary of Contents for Directechs DIRECTWIRE DB3

  • Page 1 403.TL16 v1.08 2022 Toyota RAV4 Hybrid Functions compatible with the 2022 Toyota RAV4 Hybrid 3x LOCK START (Start control using OEM Remote) Factory Alarm Trigger Monitoring 3x LOCK STOP (Stop control using OEM Remote) Fuel level/EV battery level Accessory Activation Ignition Activation Arm Factory Security Ignition Status...
  • Page 2 Contents Introduction Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Module programming For Convenience-Only programming, see next section. Module programming for convenience only (skip transponder) SmartStart Pro/Digital RF Kit/XL202 installation notes LED diagnostics and troubleshooting Parking light error codes Soft reset Hard reset...
  • Page 3 RSR mode (compatible with firmware version ending with .101 or higher only). • XL202 & Analog RF Kit Notes • This module can only be flashed and configured using DirectLink at www.directechs.com. • RSR mode is not compatible with vehicles equipped with a manual transmission. 403.TL16 1.08 2022 Toyota RAV4 Hybrid...
  • Page 4 Pre-installation and application warnings This section highlights important information for this specific firmware and will assist in pricing accordingly, as START HERE well as bringing awareness to any operational or vehicle limitations. Compatibilities and Requirements T-Harness Keys required for Keys required T-Harness is not compatible.
  • Page 5 Wiring diagram Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( TPMS Interrupt: Lavender/Black or Black, pin 12 HS CAN High: Tan, pin 5 IMO: Lavender/Lt. Green, pin 3 HS CAN Low: Violet, pin 4 IMO/IMI Connector (white conn.
  • Page 6 Locating components in the vehicle 403.TL16 1.08 2022 Toyota RAV4 Hybrid ©2023 Directed. All rights...
  • Page 7 Vehicle connections The connection information listed below is specific to the 2022 Toyota RAV4 Hybrid. Refer to “Pre-installation and application warnings” for a list of important notes. Data 14-pin blue connector (H1) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color H1/1...
  • Page 8 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color H3/1 Green No Connection No Connection H3/2 Blue No Connection No Connection H3/3 Red/White No Connection No Connection H3/4 White/Violet Immo Data Left of Dash Fuse Box, white 20 pin plug (AG4), pin 3 Data Lavender/Lt.
  • Page 9 Module programming Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes. Convenience-Only programming, see next section. Ensure vehicle is in a safe location and cannot move forward during programming. The harnesses must be connected in this exact order:  ...
  • Page 10 Module programming for convenience features only (skip transponder programming) Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes. To connect the module: Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift is in the neutral position.
  • Page 11 SmartStart Pro/Digital RF Kit/XL202 installation notes The DB3 Remote Start Ready (RSR) solution offers four (4) configuration options to control your system: 3x OEM Lock Remote Start Activation (if applicable, refer to the "vehicle function compatibilities" section), SmartStart Pro, Digital RF Kit, XL202 & Analog RF Kit (all sold separatly).
  • Page 12 LED diagnostics and troubleshooting This section provides LED diagnostics and troubleshooting information to guide you through the various stages of your installation. Module Programming Description Troubleshooting Make sure the D2D harness is connected and that 12 Volt is present between the red and black wires. If Module has no power.
  • Page 13   Active Ground When Running (Status) Description Troubleshooting Ground When Running (Status) command The module has initialized the remote start sequence. received. Flashes green Ignition ON command received. The module has received the Ignition ON command and is processing the remote start sequence. Flashes red &...
  • Page 14 Parking light error codes The parking lights on your vehicle will flash a specific number of times 3 seconds following an unscheduled shutdown. Each flashing pattern is described below. Flashes Diagnostic Runtime expired. Over-rev shutdown. Low or no RPM. Shutdown without remote. Brake shutdown.
  • Page 15 Limited 12 Months Consumer Warranty VOXX DEI LLC (the Company) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product, (at the Company’s option) without charge for parts or repair labor.
  • Page 16 Quick Reference Guide (customer copy) Sending commands to your vehicle Pit stop/idle mode Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there are Stop the vehicle in a safe parking spot and put the gear in gear in Park 3 possible ways you can send commands to your vehicle, using the: Park (P).
  • Page 17 List of available commands Notes Note that the information below is for many Viper, Clifford, Python, Avital, Automate, Autostart and AstroStart models. Icons and commands may differ depending on the model and options purchased. Refer to your authorized installation center for more specific information. Button(s) Actions Press &...