Hisense 75B4E30T User Manual page 13

1.4.1. VESA Grid
75B4E30T/86B4E30T 600(H) x 400(V) mm
NOTE:
The appearance and color of the product are subject to the material object. The
picture is for reference only.
1. Lay a protective sheet on a table, which was wrapped around the display when it
was packaged, beneath the screen surface so as not to scratch the screen face.
2. Ensure you have all accessories for mounting this display (wall mount, ceiling
mount, table stand, etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow
correct mounting procedures could result in damage to the equipment or injury to
the user or installer. Product warranty does not cover damage caused by improper
installation.
4. For the wall-mounting kit, use M8 mounting screws (having a length 10-20 mm
longer than the thickness of the mounting bracket) and tighten them securely.
To prevent the display from falling:
• For wall or ceiling installation, we recommend installing the display with metal
brackets which are commercially available. For detailed installation instructions,
refer to the guide received with the respective bracket.
• To lessen the probability of injury and damage resulting from fall of the display
in case of earthquake or other natural disasters, be sure to consult the bracket
manufacturer for installation location.
Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the
diagram below.
100 mm
100 mm
100 mm
Unpacking and Installation
100 mm
3