ADJ SCENE SETTER 48 User Manual page 9

O V E R V I E W
FRONT VIEW
Diagram
Feature
No.
1 Preset A LEDs
2 Channel Sliders 1-24
3 Flash Buttons 1-24
4 Preset B LEDs
5 Scene LEDs
6 Channel Sliders 25-48
7 Flash Buttons 25-48
8 Dark Button
9 Down / Beat Rev
10 Mode Select / Rec Speed
11 Up / Chase Rev
12 Page Button
13 Delete / Rev One
14 Segment Display
15 Insert / % or 0-255
16 Edit / All Rev
17 Add or Kill / Rec Exit
Description
Show the current intensity of the relevant channel num-
bered from 1 to 24.
These 24 sliders are used to control and/or program the
intensities of channels 1-24.
These 24 buttons are used to bring an individual channel to
full intensity.
Show the current intensity of the relevant channel num-
bered from 25-48.
Light when relevant scenes are active.
These 24 sliders are used to control and/or program the
intensities of channels 25-48.
These 24 buttos are used to bring an individual channel to
full intensity. Also used from programming.
This button is used to momentarily black out overall output.
DOWN functions to modify a scene in Edit mode;
BEAT REV is used to reverse the chasing direction of a
program with regular beat.
Each tap will activate the oeprating mode in the following
order: CHNS/SCENES, Double Preset, and Single Preset.
Rec Speed: Set the speed of any of the programs chasing
in Mix mode.
Up is used to modify a scene in Edit mode.
Chase Rev is used to reverse the chasing direction of a
scene under Speed Slider control.
Tap to select pages of scenes from Page 1-4.
Delete any step of a scene or reverse the chasing direction
of any program.
Shows the current activity or programming state.
Insert is to add one step or multiple steps into a scene.
% or 0-255 is used to toggle the display value between %
and 0-255.
Edit is used to activate Edit mode.
All Rev is used to reverse the chasing direction of all pro-
grams.
In Add mode, multiple scenes or Flash buttons will be on at
the same time.
In Kill mode, pressing any Flash button will kill any other
scenes or programs.
Rec Exit is used to exit from Program or Edit mode.
CONTINUED ON NEXT PAGE
9