Implementation - ADJ SCENE SETTER 48 User Manual

M I D I O P E R A T I O N

6. IMPLEMENTATION

1. While receiving and sending MIDI data, all MIDI scenes and channels that are currently running
will automatically paused if there is no response within 10 minutes.
2. While receiving and sending a file dump, the controller will automatically search for or send to
Device ID of 55H(85), a file named DC2448 with an extension of "BIN(SPACE)".
3. File dump allows this controller to send its MIDI data to the next unit or to other MIDI devices.
4. There are two types of file dump mode: Open Loop Mode and Close Loop Mode. Both are
decribed in the following diagrams:
5. The controller will send and receive Note On and Note Off data via the Flash buttons, as detailed
in the table below:
Note No.
22 - 69
70 - 117
118
119
120
121
122
123
124
125
126
Open Loop Mode
CONTROLLER
MIDI OUT MIDI IN
Close Loop Mode
CONTROLLER
MIDI OUT MIDI IN
Velocity
Program Master
Channel Intensity
RECEIVER
MIDI OUT
RECEIVER
MIDI OUT
Function
Turn on or off program 1-48
Active channel 1-48
Full On
Dark
Hold
Turn on of off Audio
CHNS SCENES
Double Preset Mode
Single Preset Mode
Step
Black Out
26
MIDI IN
MIDI IN