Insert A Step Or Steps - ADJ SCENE SETTER 48 User Manual

O P E R A T I O N G U I D E
2.5 Delete a Step or Steps (continued).
Example: Delete the third step of the program on Flash
button 25 on Page 2.
1. Record enable.
2. Tap the Mode Select button to select CHNS SCENE
mode.
3. Tap the Page button until the Page 2 LED lights.
4. Tap Flash button 25 while pressing and holding down
the Edit button. The Scene LED will illuminate.
5. Tap the Step button to scroll to the third step.
6. Tap the Delete button to delete the step.
7. Tap the Rec Exit button while pressing and holding
down the Record button to exit Edit mode.

2.6 Insert a Step or Steps.

1. Record a scene or scenes you wish to insert.
2. Be sure that the device is in CHNS SCENE and enter
the Edit mode.
3. Tap the Step button to scroll to the where you wish to
insert the new step. The new step will be inserted
before the step that is shown on the display screen.
4. Tap the Insert button to insert the step. All LEDs
will flash, indicating the step has been successfully
inserted.
5. Exit Edit mode.
18
STEP
INSERT