Clear A Scene Or Scenes; Delete A Step Or Steps - ADJ SCENE SETTER 48 User Manual

O P E R A T I O N G U I D E

2.4 Clear a Scene or Scenes.

1. Activate Record Enable, as described in the Record
Enable section.
2. Record a scene or scenes.
3. If you wish to delete these recorded scens, tap the Rec
Clear button while pressing and holding the Record
button. All LEDs will flash, indicating that the scenes
have been cleared.

2.5 Delete a Step or Steps.

1. Enter the Edit mode.
2. Tap the Step button to scroll to the step you wish to
delete.
3. Tap the Delete button when you reach the step you
wish to delete. All LEDs will flash briefly to indicate that
the step has successfully been deleted.
4. Repeat steps 2 and 3 until all unwanted steps have
been deleted.
5. Tap the Rec Exit button while pressing and holding the
Record button. The Scene LED should turn off, indicat-
ing that the device is no longer in Edit mode.
PROCEDURE CONTINUED ON NEXT PAGE
17
RECORD
REC
CLEAR
STEP
DELETE
RECORD
REC
EXIT