Table of Contents
Advertisement
GATE OPERATOR INSTALLATION
Plans of Installation - Pull to Open Option
This application is typically used to open the gate towards the inside of the
property. The operator will " PULL" the gate to open.
1.
The gate must be installed in a location so that enough clearance is provided
between the gate and adjacent structures to reduce the risk of entrapment
when opening and closing.
2. Swing gates are not to open into public access areas.
Gate in Closed Position
E
A
Range
90° - 120°
6"
90° - 120°
6 ⅝"
121° - 135°
5 ½"
!
Varying from the dimensions provided above may severely af fect the speed and
performance of the gate operator.
1 2
C
B
C
4 ½"
27"
7 7/8"
28"
9"
27"
B
A
Gate in Open Position
D
E
31 1/2"
4 3/4"
35 7/8"
4 3/4"
36"
4"
VIKING TECHNICAL SUPPORT 1.800.908.0884
Travel Speed
Faster
Slower
Advertisement
Table of Contents
