Table of Contents
Advertisement
GATE OPERATOR INSTALLATION
Pull to Open Installation Option
This application is typically used to open the gate towards the inside of the property.
The operator will " PULL" the gate to open.
1.
The gate must be installed in a location so that enough clearance is provided
between the gate and adjacent structures to reduce the risk of entrapment when
opening and closing.
2. Swing gates are not to open into public access areas.
ALL DIMENSIONS ARE MEASURED IN INCHES
Range
90°
6.50 - 9.50
110°
!
Varying from the dimensions provided above may severely af fect the speed and
1 2
MAX 110°
A
B
3.75 - 7.00
6.50
7.00
performance of the gate operator.
C
E
24.000
4.750
24.000
4.750
VIKING TECHNICAL SUPPORT 1.800.908.0884
Advertisement
Table of Contents
