Table of Contents
Advertisement
TROUBLESHOOTING - STANDARD ECU
LCD Display References
Meaning
LCD MSG
Multi Meter Displays
MOT AMP
This is the actual motor amperage during operation.
__._ A
MOT VOLT
This is the actual motor voltage during operation.
__._ VDC
AC VOLT
This is the actual low voltage AC to the Control Board from the transformer.
__._ VAC
CHARGE
Indicates the charging voltage to the batteries, if the Battery Switch is in the
OFF position.
__._ VDC
BAT VOLT
Indicates battery voltage, if the AC power is discontinued to the Control
Board.
__._ VDC
Board Settings Messages
Speed
Shows the percentage of speed set by the Speed adjustment on the Control
Board. (pg 24)
__ %
OVERLAP
Shows the number of seconds set by the Overlap Adjustment on the Control
Board. (pg 24)
__ SEC
ODS SENS
Shows the force setting selected to trip the obstruction sensor. (pg 24, 26)
___%
TIMER
Shows the amount time set or remaining to hold the gate at the Open Limit
position, before the gate starts to close. (pg 24)
__ SEC
HEATER
The Integrated Heater is disabled for the open
__ OFF
limits (pg 27)
HEATER
The Integrated Heater has been enabled to turn on at the open
__ ON
"CLS"
close
VIKING TECHNICAL SUPPORT 1.800.908.0884
"ACTV"
limits (pg 27)
will also be displayed while it is heating.
"OPN"
"CLS"
and/or close
"OPN"
Page 41
TS Ref #s
and/or
3 9
Advertisement
Table of Contents
