Table of Contents
Advertisement
GATE OPERATOR INSTALLATION
Plans of Installation - Pull to Open Option
This application is typically used to open the gate towards the inside of the
property. The operator will " PULL" the gate to open.
1.
The gate must be installed in a location so that enough clearance is provided
between the gate and adjacent structures to reduce the risk of entrapment
when opening and closing.
2. Swing gates are not to open into public access areas.
A
(2⅝)
Open
A
(2⅝)
Open
!
Varying from the dimensions provided above may severely af fect the speed and
performance of the gate operator.
1 2
B
C
B
C
120°
Closed
A
2"- 6"
6" - 10"
10" - 11"
90°
**12" - 18"
* For best performance, decrease "C" as you increase "A"
** You must extend both arms equally, up to 6" each
Closed
A
2"- 4"
4" - 6"
* For best performance, decrease "C" as you increase "A"
VIKING TECHNICAL SUPPORT 1.800.908.0884
B
*C
4⅛" - 4½"
24" - 20"
4⅛" - 4½"
22" - 19"
4⅛" - 4½"
19" - 18"
4⅛" - 4½"
**24" - 18"
B
*C
12"
17" - 15"
12"
15"
Advertisement
Table of Contents
