Table of Contents
Advertisement
3. Maintenance Procedures
Maintenance Schedule
ACTION
WAX
Frames
INSPECT
Accessories
Paint
Hardware
Frame
Clean
• Frame with a mild soap and water.
Wax
• Frames with a standard, non-abrasive, wax finish.
Inspect
• Hardware. Check for loosening. Tighten as required.
• Frames. Inspect for wear and damage.
• For paint chips. Fill in immediately with manufacturers touch-up paint.
• Straps for Power Rack Flexible Bar Catches to be inspected for cuts, frays, or other damage. Any strap showing sign
of damage should be replaced immediately.
Once a Week
• Visually inspect all hardware for loosening, tampering or wear.
• Inspect all accessories, connecting links, and carabiner clips for wear.
Once a Month
• Inspect hardware on all machines and tighten any bolts or nuts that may have loosened over the life of the product.
Notes
• Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary.
Approved and Compatible Cleaners
Two preferred cleaners have been approved by reliability experts: PureGreen 24 and Gym Wipes. Both cleaners will
safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial Force
formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a spray which is convenient to use. Apply the spray to a microfiber cloth and wipe down
the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at
least 10 minutes for fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym
Wipes on the equipment for at least 2 minutes for general disinfection purposes.
Contact Customer Support Services to order these cleaners (1-800-351-3737 or email:
customersupport@lifefitness.com).
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior
surfaces. Use a soft microfiber cloth only. Apply the cleaner to the microfiber cloth before cleaning. DO NOT use
ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners
directly to the equipment surfaces.
DAILY
WEEKLY
Page 26 of 29
MONTHLY
X
X
X
X
AS NEEDED
X
Advertisement
Table of Contents
