Zte ZXHN H1600 Maintenance Management Manual page 99

ZXHN H1600 Maintenance Management Guide
Parameter
Periodic Inform
Periodic Inform Interval
Authenticating ACS
ACS CA Certificate Chain
4. Click Apply button to apply the changes.
Configure the STUN
1. Click STUN Configuration to the STUN configuration page, see
Figure 8-10 STUN Configuration
2. Configure the STUN configuration parameters.
tion parameters.
Table 8-5 Parameter Descriptions for the STUN Configuration
Parameter
Enable
Server Address
3. Click Apply button to apply the changes.
Configure the Certificate
1. Click Certificate Management to the certificate management page, see
8-8
Description
Enable the periodic inform function.
Periodic inform interval of the device (unit: second).
Enable the TR-069 authenticating ACS.
Auto: Automatically select the first chain certifcate authenti-

cation or the second chain certificate authentication
Chain1: The first chain certifcate authentication

Chain2: The second chain certifcate authentication

Table 8-5
Description
After the STUN function is enabled, clients after NAT (or mul-
tiple NAT) can find their public network addresses, and deter-
mine the type of NAT and the Internet port bound to the local
port. These information is used to create UDP communication
between two hosts after the NAT router.
The address of the server
SJ-20200218145027-006 | 2021-03-04(R1.0)
Figure 8-10.
lists the STUN configura-
Figure 8-11.