Zte ZXHN H1600 Maintenance Management Manual page 30

ZXHN H1600 Maintenance Management Guide
Parameter
IP Address
Subnet Mask
Gateway
DNS1-DNS3
IPv6
IPv6 Info Acquire Mode
Request PD
Unnumbered Mode
GUA Allowed From
GUA
PD
Gateway
5-8
Description
Static: You need to specify a static IP address for the device.

IPoA: It is valid only if the WAN Type parameter is set to

DSL.
CLIP: Classical IP over ATM, IP packets to be transferred

over ATM mode through packet encapsulation.
IP Address of ZXHN H1600.
Subnet mask of ZXHN H1600.
It is usually the IP address of the ZXHN H1600 by default.
IP address of the DNS server for static connections. You can set
up to three IP addresses for the server. These IP addresses are
provided by the ISP.
Specifies how to acquire IPv6 information for the WAN connec-
tion. It is valid only if the WAN connection supports IPv6.
The options are:
Manual :You need to set the global address, gateway, and

DNS acquisition modes.
Auto: The global address, gateway, and DNS acquisition

modes are automatically configured.
By default, the On button is selected.
By default, the On button is not selected. If it is selected,
Specifies how to acquire the global IPv6 address.
Specifies how to acquire the global IPv6 address. It is valid on-
ly when the IPv6 Info Get Mode parameter is set to be Manual
Mode. Options:
DHCPv6: The device acquires a global address through

DHCPv6. If no option is selected, it indicates that no address
acquisition mode is configured.
PD: You need to set a static IPv6 address.

SLAAC: The device generates a global address in accor-

dance with the RA packets from the upper-layer server.
Mode of obtaining global address.
Prefix Delegation.
It is usually the IPv6 address of the ZXHN H1600 device by de-
fault.
SJ-20200218145027-006 | 2021-03-04(R1.0)