Zte ZXHN H1600 Maintenance Management Manual page 104

2. Type the host IP address or host name in the IP Address/Host Name text box, se-
lect the WAN/LAN connection from the Egress drop-down list.
3. Click Diagnosis to diagnose the connection, and the system will display the follow-
ing diagnosis results.
Configure the Trace Route Diagnosis
1. On the main page of the ZXHN H1600 device, select Management & Diagnosis >
Diagnosis to open the Trace Route Diagnosis page, see
Figure 8-17 Trace Route Diagnosis
2. Type the IP address or host name in the IP Address/Host Name text box, select one
WAN connection, specify the Maximum Hops, Wait time, and Protocol.
3. After the configuration, click Diagnosis.
Configure the DSL Line Diagnosis
1. On the main page of the ZXHN H1600device, select Management & Diagnosis >
Diagnosis to open the DSL line diagnosis page, see
SJ-20200218145027-006 | 2021-03-04(R1.0)
8 Configure the Management and Diagnosis
Figure
Figure 8-18.
8-17.
8-13