Zte ZXHN H1600 Maintenance Management Manual page 73

Parameter
3. Click Apply button to apply the changes.
Configure the RA Service
1. Click RA Service to the configuration page, see
Figure 6-15 RA Service Page
2. Configure the
Table 6-11 Parameter Descriptions for the RA Service
Parameter
RA Service
Specify MTU
MTU
Preference
Minimum Retry Interval
Maximum Retry Interval
M
SJ-20200218145027-006 | 2021-03-04(R1.0)
Description
Manual: One or more prefixes selected manually from all the

static prefixes configured before will be delegated.
Disabled: No prefix will be delegated.

RA service parameters.Table 6-11
Description
Click On to enable the function. Click Off to disable the function.
If On button is selected, enter the MTU value.
Define the maximum transfer unit.
By default, the preference is Middle.
The minimum time allowed between sending unsolicited multi-
cast Router Advertisements from the interface. (The value must
not be greater than 0.75 * (Maximum Retry Interval )).
maximum time allowed between sending unsolicited multicast
Router Advertisements from the interface.
Managed flag.
Select this check box to enable the connected devices to obtain
the IPv6 address through DHCP IPv6.
6 Configure the Local Network
Figure 6-15.
lists the RA service parameters.
6-13