Zte ZXHN H1600 Maintenance Management Manual page 28

ZXHN H1600 Maintenance Management Guide
Steps
Configure the DSL Connection
1. On the main page of the ZXHN H1600, select Internet > WAN > DSL to the DSL
Connection page, see
Figure 5-7 DSL Connection page
Table 5-1
Table 5-1 Parameter Descriptions for the DSL
Parameter
Connection Name
DSL Transfer Mode
VPI/VCI
5-6
Figure
lists the new item parameters.
Description
Name of the connection.
There are two xDSL transfer modes: ATM, PTM.
If xDSL Transfer ModeEnter is selected to be ATM, the VPI/VCI
values provided by the ISP needs to be configured.
VPI Range: 0 - 255
5-7.
SJ-20200218145027-006 | 2021-03-04(R1.0)