Zte ZXHN H1600 Maintenance Management Manual page 14

ZXHN H1600 Maintenance Management Guide
LED Indicator
USB
PHONE1
PHONE2
LAN1\LAN2\
LAN3\LAN4
 The LAN1\LAN2\LAN3\LAN4 status indicator is on the LAN1\LAN2\LAN3\LAN4 port of the ZXHN
H1600.
Top Panel
Figure 2-2
Figure 2-2 The Top Panel
Table 2-3
2-6
Status
Solid green
Flashing slowly green
Flashing fast green
Off
Solid green
Flashing green
Off
Solid green
Flashing green
Off
Solid green
Flashing green
shows the buttons on the top panel of the ZXHN H1600.
describes the buttons on the top panel of the ZXHN H1600.
Description
WPS access is successful. This solid-on light will be au-
tomatically off after 5 minutes.
WLAN terminal is in WPS accessing process.
The WPS accessing of the WLAN terminal is faulty.
The device is powered off or the USB interface is not
connected.
The USB interface is connected with USB device.
Data is being transmitted or receivedvia the USB inter-
face.
The device has not been registered to the VOIP net-
work.
The device has registered to the VOIP network.
The associated telephone is off-hook.
The LAN connection has not been established.
The LAN connection has been established.
Data transmission is in processing, The indicator flashes
according to the LAN traffic.
SJ-20200218145027-006 | 2021-03-04(R1.0)