Table of Contents Britax Child Safety, Inc. Child Seat Features Front 1. Cover User Guide Storage (in pocket behind cover) 2. Arm Rest 11. Harness Buckle 3. Booster Mode Belt Guide 12. Lower Connector 4. Cup Holder And Storage Storage 5.
Page 5
Table of Contents GROW WITH YOU User Guide Rear 17. Serial Number And 25. Lower Connector Manufactured Date Label Release Button 18. Tether Adjuster 26. Lower Connector 19. Tether Hook 27. Shell 20. Tether Webbing 28. Tether Storage Strap 21. Harness Straps 29.
• Register your child restraint with the manufacturer. • Britax recommends that the top tether be used at all times when installing the child seat. Using the top tether will improve the stability of your child seat and reduce the risk of injury.
GROW WITH YOU User Guide • The use of non-Britax covers, inserts, toys, accessories, or tightening devices is not approved by Britax. Their use could cause this child seat to fail Federal Motor Vehicle Safety Standards or not perform as intended in a crash.
Send your name, address, and the child seat’s model number and manufacturing date to Britax Child Safety, Inc., P.O. Box 91167 Allentown, PA 18109-9925, or call 1-888-427- 4829 or 1-704-409-1699, or register online at us.britax.
Shoulder Level shoulders when seated. Booster Mode NOTE: Britax recommends booster mode only after the child outgrows harness mode. Children must: 1. Weigh between 40 and 120 lbs (18.1 and 54 kg); and 2. Stand between 44 and 63 in (110 and 160 cm) in height;...
Do not install with the lower anchors for a child weighing more than 45 lbs (20.4 kg). Britax recommends that the top tether be used at all times when installing the child seat. Using the top tether will improve the stability of your child seat and reduce the risk of injury.
Page 11
This child seat can be used in booster mode with children who weigh between 40 and 120 lbs (18 and 54 kg) and stand between 44 and 63 in (110 and 160 cm) in height. Britax recommends using booster mode only once your child has outgrown harness mode. •...
• Check that your vehicle has a top tether anchor. • Britax recommends that the top tether be used at all times when installing the child seat. Using the top tether will improve the stability of your child seat and reduce the risk of injury. Check your vehicle owner’s manual for tether anchor locations.
Page 13
Table of Contents GROW WITH YOU User Guide 4. Firmly press the tether hook over a designated vehicle tether anchor. Remove slack. 5. Secure excess webbing with the elastic strap. Lap-Shoulder Belt NOTE: To ensure proper installation of the child seat: Route...
Page 14
45 lbs (20.4 kg). • Check that your vehicle has a top tether anchor. • Britax recommends that the top tether be used at all times when installing the child seat. Using the top tether will improve the stability of your child seat and reduce the risk of injury.
Page 15
Table of Contents GROW WITH YOU User Guide 4. Firmly press the tether hook over a designated vehicle tether anchor. Remove slack. 5. Secure excess webbing with the elastic strap. LATCH NOTE: Do not install by this method for a child weighing more than 45 lbs (20.4 kg).
Page 16
• Check that your vehicle has a top tether anchor. • Britax recommends that the top tether be used at all times when installing the child seat. Using the top tether will improve the stability of your child seat and reduce the risk of injury. Check your vehicle owner’s manual for tether anchor locations.
Page 17
Table of Contents GROW WITH YOU User Guide 4. Firmly press the tether hook over a designated vehicle tether anchor. Remove slack. 5. Secure excess webbing with the elastic strap. Lap Belt 9 All connections are secure and vehicle belt is not twisted.
Table of Contents Britax Child Safety, Inc. Installation in Booster Mode Lower Anchors Before you begin: IMPORTANT: It is not necessary to use lower anchors or tether to position this child restraint in booster mode. To use this seat in booster mode without lower anchors, see instructions for Securing Your Child on page 17.
Table of Contents GROW WITH YOU User Guide Securing Your Child Harness Mode WARNING! Never route the vehicle belt over the child when using this child seat in harness mode. Adjust the belts provided with this child seat so they fit snugly around your child.
Page 20
Table of Contents Britax Child Safety, Inc. 5. Position the harness straps around the child (See page 21). NOTE: Adjust the harness to fit the clothes the child is wearing. Remove bulky coats, jackets and/or bulky sports equipment before putting the child in the child seat.
Table of Contents GROW WITH YOU User Guide Booster Mode WARNING! Warning! Use only the vehicle’s lap and shoulder belt system when restraining the child in this booster seat. Use the shoulder belt guides on the child seat to ensure proper fit.
Page 22
Table of Contents Britax Child Safety, Inc. NOTE: Ensure that the belt passes under armrest along belt guide on buckle side. 5. Remove slack from the vehicle belt. Before traveling, verify that the: 9 Child restraint is in a vehicle seat that has a lap-shoulder belt.
Table of Contents GROW WITH YOU User Guide Child Seat Functions Adjusting Harness and Head Restraint Height IMPORTANT: Make all adjustments for the fit of your child before using the child seat. Place the child seat on the floor and have your child sit in the seat. Follow the instructions on the following pages to make the proper adjustments to the harness, buckle, and head restraint.
Table of Contents Britax Child Safety, Inc. WARNING! In some cases, the vehicle head restraint can prevent the child seat head restraint from being raised high enough to properly adjust the harness for the fit of your child. DO NOT force the child seat head restraint past the vehicle head restraint.
Table of Contents GROW WITH YOU User Guide 2. Pull the seat cover forward. 3. Unhook the elastic bands at the back of the seat cover. Pull the seat cover forward and over the belly pad. 4. Turn and pull the buckle retainer through the slot in the child seat shell.
Table of Contents Britax Child Safety, Inc. Using the Harness Buckle To Fasten: Insert one tongue at a time into the buckle. NOTE: Proper connection is confirmed with an audible click after inserting each buckle tongue. To Release: Press the release button and pull the tongues from the buckle.
Table of Contents GROW WITH YOU User Guide Using Lower Anchors and Tethers for Children (LATCH) Vehicle Seat Head Restraint Vehicle Seat Top Tether Anchors Vehicle Seat Belt Retractor Lap-Shoulder Vehicle Seat Belt Frontal Air Bag LATCH Seat Belt Buckles...
DO NOT modify your vehicle without advice from your vehicle manufacturer. HARNESS MODE: Britax recommends that the top tether be used at all times when installing the child seat. Using the top tether will improve the stability of your child seat and reduce the risk of injury.
Page 29
Table of Contents GROW WITH YOU User Guide 2. Firmly press the hook over the a tether anchor point. IMPORTANT: Use the elastic strap to contain extra webbing. Always ensure any excess webbing is contained within your vehicle. The Tether as a Crash Indicator...
Table of Contents Britax Child Safety, Inc. Switching Between Modes IMPORTANT: It is not necessary to remove the harness to use this seat in booster mode. To store the harness, follow the instructions below. If you wish to remove, follow the instructions on page 31- 32.
Page 31
Table of Contents GROW WITH YOU User Guide 6. Lay the belly pad forward and position on top of the harness adjuster release lever. 7. Place the seat cover and foam back in their original position and attach the elastic bands.
Page 32
Table of Contents Britax Child Safety, Inc. Booster to Harness Mode: Restoring the Harness and Buckle 1. Pull seat cover forward. 2. Unhook the elastic bands at the back of the seat cover. Pull the seat cover and foam insert forward.
Page 33
Table of Contents GROW WITH YOU User Guide 7. Fasten the harness buckle. 8. Pull the adjuster strap to tighten the harness. NOTE: Pull the harness adjuster away from the child seat (parallel to the ground) to tighten. Harness to Booster Mode: Removing the Harness and Buckle 1.
Page 34
Table of Contents Britax Child Safety, Inc. 4. Pull seat cover forward. 5. Unhook the harness straps from the hip anchors. 6. Unhook the elastic bands at the back of the seat cover. Pull the seat cover forward and over the belly pad.
Page 35
Table of Contents GROW WITH YOU User Guide 3. Turn and push the buckle retainer through the slot in the child seat shell. NOTE: Choose the slot closest to, but not under the child. 4. Pull the belly pad through the corresponding slot in the seat cover.
Page 36
Table of Contents Britax Child Safety, Inc. 9. Buckle the harness and pull the adjuster strap to tighten the harness. NOTE: Pull the harness adjuster away from the child seat (parallel to the ground) to tighten. IMPORTANT: Check all attachments before using the...
NOTE: This Britax car seat may not be compatible with every inflatable lap-shoulder belt. See FAQs in the support section of the Britax website (us.britax. com/faqs) for additional instructions.
Table of Contents Britax Child Safety, Inc. Vehicle Buckle Positions WARNING! The position of the vehicle belt buckle can adversely affect the stability of the child seat. If the buckle lies near the incorrect position ( ) when the vehicle belt is tightened,...
Table of Contents GROW WITH YOU User Guide Maintenance Removing the Cover NOTE: If removing cover to wash, see Cleaning section on page 42. WARNING! Never remove the buckle tongues from the harness. 1. Loosen the harness. a. Press release lever b.
Page 40
Table of Contents Britax Child Safety, Inc. 6. Unhook the elastic bands, then remove the side wing covers from each side of the child seat shell. NOTE: Be careful not to damage the energy- absorbing foam. 7. Pull seat cover forward.
Table of Contents GROW WITH YOU User Guide Replacing the Cover 1. Pull the elastic bands over the hooks on the bottom of the child seat shell. 2. Hook the clips at the front of the seat cover to the bottom of the child seat shell.
Table of Contents Britax Child Safety, Inc. 7. Fit the head restraint cover over the head restraint and pull the top elastic bands over the hooks at the top of each side of the head restraint. 8. Attach the hook and loop...
Table of Contents GROW WITH YOU User Guide Replacing the Buckle IMPORTANT: Choose the slot closest to, but not under the child. 1. Turn and push the buckle retainer through the slot in the child seat shell. 2. Pull the belly pad through the corresponding slot in the seat cover.
Table of Contents Britax Child Safety, Inc. Cleaning Shell DO NOT • SPONGE CLEAN the shell using warm water • Use abrasive and mild soap. cleaners. • TOWEL DRY Cover DO NOT • Refer to product care label for wash •...
Proof of purchase is required. The exclusive remedy for this warranty is that Britax will, at its option, provide repair or replacement components for this product. Britax reserves the right to discontinue or change fabrics, parts, models or products, or to make substitutions.
Page 46
This warranty gives you specific legal rights, and you may have other rights, which vary from state to state. Neither Britax, nor the retailer selling this product, authorizes any person to create for it any other warranty, obligation, or liability in connection with this product.
Índice Britax Child Safety, Inc. Características del asiento para niños Parte frontal 1. Cubierta Compartimiento para 2. Reposabrazos la Guía del Usuario (En el 3. Guía para el cinturón del bolsillo detrás de la modo silla alta cubierta) 4. Portavaso y 11.
Page 49
Índice GROW WITH YOU Guía de Usuario Parte trasera 17. Etiqueta con el número 25. Botón de desbloqueo de serie y fecha de del conector inferior fabricación 26. Conector inferior 18. Ajustador de amarre 27. Carcasa 19. Gancho de la correa de 28.
• Registre este dispositivo de retención infantil con el fabricante. • Britax recomienda que se use la correa de retención superior en todo momento, cuando se esté instalando el asiento de seguridad para niños. El uso de esta correa de retención superior mejorará...
• Britax no aprueba el uso de cubiertas, piezas, juguetes, accesorios o dispositivos de ajuste que no sean de Britax. Su uso podría hacer que el asiento no cumpla con las normas federales de seguridad automotriz o que no rinda como debiera durante un accidente.
Envíe su nombre, dirección, dirección de correo electrónico si está disponible y el número de modelo y fecha de fabricación del asiento a Britax Child Safety, Inc. P.O. Box 91167 Allentown, PA 18109-9925, o llame al 1-888-427-4829 o 1-704-409- 1699, o regístrese en us.britax.com/registration.
Por debajo de la altura hombros del niño o por encima. de los hombros Modo Silla Alta NOTA: Britax recomienda utilizar el modo regulable solo cuando el niño sea demasiado grande para utilizar el modo de arnés. Los niños deben: 1.
2 años de edad, con un peso comprendido entre 11,3 y 30 kg (25 y 65 lbs) y una altura entre 85 y 125 cm (34 y 49 pulg). Britax recomienda utilizar el modo de arnés hasta su niño sea demasiado grande para utilizar el modo de arnés.
Page 55
• Este asiento de seguridad para niños puede utilizarse en modo regulable con niños que pesan entre 18 y 54 kg (40 y 120 lbs) y son entre 110 y 160 cm (44 y 63 pulg) de altura. Britax recomienda utilizar el modo regulable solo cuando el niño sea demasiado grande para utilizar el modo de arnés.
• Comprueba que su vehículo dispone de un anclaje de retención superior. • Britax recomienda que se use la correa de retención superior en todo momento, cuando se esté instalando el asiento de seguridad para niños. El uso de esta correa de retención superior mejorará...
Page 57
Índice GROW WITH YOU Guía de Usuario 4. Presione el gancho de la correa de retención con fuerza hasta acoplarlo en el anclaje de retención del vehículo y tense el cinturón. 5. Asegure el excedente de la correa con la cinta elástica...
Page 58
• Comprueba que su vehículo dispone de un anclaje de retención superior. • Britax recomienda que se use la correa de retención superior en todo momento, cuando se esté instalando el asiento de seguridad para niños. El uso de esta correa de retención superior mejorará...
Page 59
Índice GROW WITH YOU Guía de Usuario 4. Presione el gancho de la correa de retención con fuerza hasta acoplarlo en el anclaje de retención del vehículo y tense el cinturón. Asegure el excedente de la correa con la cinta elástica.
Page 60
• Comprueba que su vehículo dispone de un anclaje de retención superior. • Britax recomienda que se use la correa de retención superior en todo momento, cuando se esté instalando el asiento de seguridad para niños. El uso de esta correa de retención superior mejorará...
Page 61
Índice GROW WITH YOU Guía de Usuario 4. Presione el gancho de la correa de retención con fuerza hasta acoplarlo en el anclaje de retención del vehículo y tense el cinturón. 5. Asegure el excedente de la correa con la cinta elástica.
Índice Britax Child Safety, Inc. Instalación en modo silla alta Anclajes inferiores Antes de comenzar: IMPORTANTE: No es necesario utilice los anclajes inferiores o la correa del retención en modo regulable. Para utilisar el asiento de seguridad del niños en modo regulable sin los anclajes inferiores sigue los instrucciones en la página 17.
Índice GROW WITH YOU Guía de Usuario 4. Presione el gancho de la correa de retención con fuerza hasta acoplarlo en el anclaje de retención del vehículo y tense el cinturón. 5. Asegure el excedente de la correa con la cinta elástica.
Page 64
Índice Britax Child Safety, Inc. 3. Suelte la hebilla y coloque las correas del arnés alrededor de los apoyabrazos. 4. Coloque al niño en el asiento de seguridad con la espalda del niño plana contra el asiento. 5. Ajuste las correas del arnés alrededor del niño...
Índice GROW WITH YOU Guía de Usuario Antes de viajar, compruebe los siguientes puntos: 9 Las correas del arnés no están torcidas. 9 El arnés está bien ajustado. 9 La hebilla está abrochada. 9 El broche pectoral está a la altura de las axilas del niño.
Page 66
Índice Britax Child Safety, Inc. 4. Ajuste el reposacabezas de manera que el cinturón de hombro del vehículo quede derecho sobre el pecho del niño, por encima de su hombro y no tenga contacto con el cuello del niño (A). La parte subabdominal del cinturón...
Índice GROW WITH YOU Guía de Usuario Funciones del asiento de seguridad Regulación de altura de reposacabezas y del arnés IMPORTANTE: Antes de utilizar el asiento de seguridad para niños, debe realizar todos los ajustes oportunos para adaptarlo al tamaño de su hijo. Coloque el asiento de seguridad para niños en el suelo y siente a su hijo en él.
Índice Britax Child Safety, Inc. ADVERTENCIA! En algunos casos, el reposacabezas del vehículo puede impedir que el reposacabezas del asiento para niños se eleve lo suficiente como para ajustar correctamente el arnés que sujeta a su niño. NO haga fuerza para que el reposacabezas del asiento para niños...
Page 69
Índice GROW WITH YOU Guía de Usuario 2. Jale la cubierta del asiento hacia adelante. 3. Desenganche las bandas elásticas que se encuentran en la parte trasera de la cubierta del asiento. Jale la cubierta del asiento hacia adelante y por encima de la almohadilla abdominal.
Índice Britax Child Safety, Inc. Utilización de la hebilla del arnés Para abrochar: Inserte las lengüetas en la hebilla de una en una. NOTA: Las lengüetas están bien enganchadas si escucha clic cuando las inserta. Para desabrochar: Presione el botón de desbloqueo y quite las dos lengüetas de la hebilla.
Índice GROW WITH YOU Guía de Usuario Anclajes inferiores y ranuras de retención para niños (sistema LATCH) Reposacabezas del asiento del vehículo Asiento del vehículo Anclaje de retención Sistema retráctil del cinturón de seguridad del vehículo Cinturón de seguridad del vehículo con...
NO modifique su vehículo sin seguir las recomendaciones del fabricante. MODO DE ARNÉS: Britax recomienda que se use la correa de retención superior en todo momento, cuando se esté instalando el asiento de seguridad para niños. El uso de esta correa de retención superior mejorará...
Page 73
Índice GROW WITH YOU Guía de Usuario 2. Presione con fuerza el gancho situado encima del punto del anclaje de retención. IMPORTANTE: Utilice la cinta elástica para sujetar la correa sobrante. Asegúrese siempre de que cualquier correa sobrante quede dentro del vehículo.
Índice Britax Child Safety, Inc. Cómo cambiar de modo IMPORTANTE: No es necesario quitar el arnés para utilizar el asiento de seguidad del niño en modo regulable. Para guardar el arnés y la hebilla siga las siguentes instrucciones. Si desea quitar el arnés y la hebilla, siga las instrucciones en la página...
Page 75
Índice GROW WITH YOU Guía de Usuario 6. Ponga la almohadilla abdominal hacia adelante y por encima de la palanca de desbloqueo de ajuste del arnés. 7. Coloque la cubierta y la espuma del asiento de nuevo en su posición original y fije las bandas elásticas.
Page 76
Índice Britax Child Safety, Inc. De modo regulable a modo arnés: Instalación del arnés y la hebilla 1. Jale la cubierta del asiento hacia adelante. 2. Desenganche las bandas elásticas que se encuentran en la parte trasera de la cubierta del asiento.
Page 77
Índice GROW WITH YOU Guía de Usuario 7. Abroche la hebilla del arnés. 8. Tire la correa del ajustador para ajustar el arnés. NOTA: Tire del ajustador del arnés del asiento para niños (paralelo al suelo) para ajustar. Como pasar de modo regulable al modo de arnés: Extracción del arnés y la hebilla...
Page 78
Índice Britax Child Safety, Inc. 4. Jale la cubierta del asiento hacia adelante 5. Desenganche las correas del arnés de los anclajes de la cadera. 6. Desenganche las bandas elásticas que se encuentran en la parte trasera de la cubierta del asiento.
Page 79
Índice GROW WITH YOU Guía de Usuario 3. Gire y deslice el retenedor de la hebilla por la ranura de la carcasa del asiento para niños. NOTA: Seleccione la ranura más cercana al niño, pero no debajo de él. 4. Pase la almohadilla...
Page 80
Índice Britax Child Safety, Inc. 9. Abroche el arnés y jale de la correa del ajustador del arnés para ajustar el arnés. NOTA: Tire del ajustador del arnés del asiento para niños (paralelo al suelo) para ajustar.suelo). IMPORTANTE: Verifique los acoples antes de utilizar el...
NOTA: El asiento de seguridad para niños de Britax puede no ser compatible con cada uno de los cinturones expandibles sobre el hombro y la cadera. Consulte las preguntas frecuentes en la sección de ayuda en el sitio web de Britax (us.britax.com/faqs)
Índice Britax Child Safety, Inc. Posición de la hebilla del vehículo ADVERTENCIA! La posición de la hebilla del cinturón del vehículo puede perjudicar la estabilidad del asiento de seguridad para niños. Si la hebilla se encuentra cerca de la posición incorrecta ( ) cuando el cinturón de seguridad está...
Índice GROW WITH YOU Guía de Usuario Mantenimiento Extracción de la cubierta NOTA: Si retira la cubierta para lavarla, consulte la sección de Limpieza en la página 42. ADVERTENCIA! Nunca quite las lengüetas de la hebilla para desabrochar el arnés.
Page 84
Índice Britax Child Safety, Inc. 6. Desenganche las cintas elásticas y retire las cubiertas laterales de ambos laterales del exterior del asiento de seguridad para niños. NOTA: Procure no dañar la espuma de absorción de fuerza. 7. Jale la cubierta del asiento hacia adelante.
Índice GROW WITH YOU Guía de Usuario Sustitución de la cubierta 1. Tire las bandas elásticas por encima de los ganchos en la parte inferior de la carcasa del asiento para niños. 2. Enganche los clips en la parte delantera de...
Índice Britax Child Safety, Inc. 7. Ajuste la cubierta del reposacabezas por encima del reposacabezas y tire de las bandas elásticas superiores por encima de los ganchos que se encuentran en la parte superior de cada lado del reposacabezas. 8. Una los sujetadores...
Índice GROW WITH YOU Guía de Usuario Reemplazo de la hebilla IMPORTANTE: Seleccione la ranura que esté más cerca del niño, pero no debajo de este. 1. Gire y deslice el retenedor de la hebilla por la ranura de la carcasa del asiento para niños.
Índice Britax Child Safety, Inc. Limpieza Exterior • LIMPIE CON UNA ESPONJA el exterior • Utilice usando agua tibia y limpiadores jabón suave. abrasivos. • SEQUE CON UNA TOALLA. Cubierta • Consulte la etiqueta de cuidado en la • Utilice lejía cubierta para obtener •...
Para realizar una reclamación de acuerdo con esta garantía, debe ponerse en contacto con el departamento de atención al cliente de Britax llamando al 1 888 427 4829 o 1 704 409 1699, o enviando una carta a la dirección especificada en la contraportada de este manual.
Page 90
Ni Britax ni el establecimiento que comercializa este producto autorizan a ninguna persona a crear cualquier otra garantía, obligación o responsabilidad en relación con este...
Page 92
Britax Child Safety, Inc. Tel.: 1-888-427-4829 4140 Pleasant Road Tel.: 1-704-409-1699 Fort Mill, SC 29708 USA A Britax Childcare company www.Britax.com...