Britax GROW WITH YOU User Manual page 11

Booster Mode
Position forward-facing only in a seating position with a
lap-shoulder belt.
Use only the vehicle's lap and shoulder belt system when
securing a child in booster mode. Never secure a child
with a lap belt only in booster mode.
Always secure the unoccupied child seat to the vehicle
by attaching the lower connectors to the lower anchors
in the vehicle, or by fastening the vehicle seatbelt across
the unoccupied child seat.
If the lower anchors in your vehicle prevent proper
vehicle belt fit across your child you cannot use LATCH
to position this seat in booster mode. See below.
The vehicle belt fits properly when
the vehicle shoulder belt lays straight
across the center of the child's chest,
above the child's shoulder and does
not contact the child's neck (A). The
lap part of the vehicle belt should be
worn under the armrests and rest low
on the child's upper thighs (B).
• This child seat can be used in booster mode with
children who weigh between 40 and 120 lbs (18 and 54
kg) and stand between 44 and 63 in (110 and 160 cm)
in height. Britax recommends using booster mode only
once your child has outgrown harness mode.
• This child seat must be
used in upright position in
booster mode.
• In booster mode,
this child seat can be
positioned on the vehicle
seat using the LATCH
system. Use the vehicle's
lap-shoulder belt to
secure the child. Ensure
that the LATCH system
does not interfere with the
vehicle belt function and
alignment when securing
your child.
GROW WITH YOU User Guide
WARNING!
Table of Contents
9