Britax GROW WITH YOU User Manual page 35

3. Turn and push the buckle
retainer through the slot
in the child seat shell.
NOTE: Choose the slot
closest to, but not under
the child.
4. Pull the belly pad through
the corresponding slot in the
seat cover. Place the seat
cover back in its original
position and attach the
retaining clips.
5. Hook the harness
straps to the hip anchors
NOTE: Ensure that the
harness is attached to the
top of the hip anchor.
6. Insert the harness straps
through the slots in the
cover and shell, and over the
harness adjuster
plate to the back of the child
seat.
7. Nest the harness straps by
inserting the right
strap loop into the left strap
loop.
8. Remove the harness yoke
from storage underneath
the seat shell and slide
the nested harness straps
completely onto the harness
yoke.
GROW WITH YOU User Guide
Table of Contents
33 33