Britax GROW WITH YOU User Manual page 16

Britax Child Safety, Inc.
Lap Belt
Before you begin:
• Check your vehicle owner's manual to determine what type of
vehicle belt you have and how it can be locked for use with child
seats.
• Check that your vehicle has a top tether anchor.
• Britax recommends that the top tether be used at all times when
installing the child seat. Using the top tether will improve the
stability of your child seat and reduce the risk of injury. Check your
vehicle owner's manual for tether anchor locations.
• Loosen the tether and place it over the child seat back to keep it
from becoming pinned between the child seat and vehicle seat
during installation.
• Adjust the child seat to desired position and place forward facing on
the vehicle seat.
1. Pull seat cover forward.
2. Pull the vehicle belt out
and route along the green
belt path.
NOTE: Verify that the
strap is not twisted.
3. Push the child seat firmly
into the vehicle seat while
removing all slack from the
lap part.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than
1 in (2.5 cm) at the belt
path. If the child seat
is not secure, repeat
the installation or use a
different seating location.
14
Table of Contents