Britax GROW WITH YOU User Manual page 14

Britax Child Safety, Inc.
LATCH
Before you begin:
• Check that your vehicle has lower anchors.
• Use the vehicle belt (not lower connectors) for harness mode
installations with children who weigh more than 45 lbs (20.4 kg).
• Check that your vehicle has a top tether anchor.
• Britax recommends that the top tether be used at all times when
installing the child seat. Using the top tether will improve the
stability of your child seat and reduce the risk of injury. Check your
vehicle owner's manual for tether anchor locations.
• Loosen the tether and place it over the child seat back to keep it
from becoming pinned between the child seat and vehicle seat
during installation.
• Adjust the child seat to desired position and place forward facing
on the vehicle seat.
1. Pull seat cover and seat
pan forward to access the
lower connectors.
2. Route the lower
connector strap along the
green belt path behind the
seat pan and firmly press
the lower connectors
onto their adjacent lower
anchors. A click helps
confirm attachment.
NOTE: Verify that the
strap is not twisted.
3. Push the child seat firmly
into the vehicle seat while
removing any slack from
the lower connector strap
to remove slack.
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than
1 in (2.5 cm) at the belt
path. If the child seat
is not secure, repeat
the installation or use a
different seating location.
12
Table of Contents