Installer Setting -Optional Function Setting - LG ABNW85GB9A0 Installation Manual

Optional Operation

Installer Setting -Optional Function Setting

This function is used when air Cleaner, heater, humidifier, elevation grill, ventilation KIT are installed
additionally or the installed KIT is removed.
B
Press and hold button for more than 3 seconds to enter the installer settings mode.
- If pressing only once briefly, it will enter the user settings mode.
Make sure to press and hold for more than 3 seconds.
B
Press button repeatedly to move to the applicable Function in the menu as below.
Select the code value and set value for each function using F G button.
Code value Set value
h In case of indoor unit that has one more additional stage in the Aux heater setting.
00: not installed
01: installed - general
02: installed - duct type
K
Press button to save the setting.
L
Press button to exit.
h If no button is selected for about 25 seconds after setup, it exits the setup mode automatically.
K
h If
button is not selected before you exit, the changes will not apply.
32
Function
Plasma purification
Electric heater
Humidifier
Elevation grill
Ventilation kit
Auxiliary heater
❈ Set value for each function
00 : Not installed
01 : Installed
Code
20
21
22
23
24
25