Installer Setting -Optional Function Setting - LG CL09R.N20 Installation Manual

OPTIONAL OPERATION
30

Installer Setting -Optional Function Setting

Setting feature for indoor unit when air cleaning / heater / humidifier / Up/down grill / Ventilation
KIT / Auxiliary Heater is newly installed, or installed unit is removed.
If pressing button long for 3
1
seconds, it enters into remote controller
setter setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If pressing button repeatedly, it moves to the
2
selected option function code as picture below.
Select existing condition of
3
each mode by pressing
button.
(00: not installed,
01 : installed)
Function Code Existing condition
Press button to save.
4
5 Pressing button will exit settings mode.
❈ After setup, it automatically gets out of setup
mode if there is no button input for 25
seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.
Function Code
Plasma purification 20
Electric heater 21
Dehumidifier 22
Elevation grill 23
Ventilation kit 24
Auxiliary heater 25