Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Installer Setting - How to enter installer setting mode
CAUTION
!
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation or
change that is carried out by a non-certificated person should be responsible for the results.
In this case, free service cannot be provided.
TIME (3 s)
°C/°F (5 s)
INSTALLATION INSTRUCTIONS
1. With the JET MODE / COOL button pressed,
press the RESET button.
2. By using the TEMPERATURE SETTING
button, set function code and setting value.
(Please refer the Installer Setting Code Table.)
3. Press the ON/OFF button toward the indoor
unit 1 time.
4. Reset the remote controller to use the general
operation mode.
Refer to the Installer Setting Code Table
on the next page.
19
Advertisement
Table of Contents
