Installer Setting-Celsius / Fahrenheit Switching
This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)
B
Press and hold
button for more than 3 seconds to enter the installer settings mode.
- If pressing only once briefly, it will enter the user settings mode.
Make sure to press and hold for more than 3 seconds.
Move to the Celsius/Fahrenheit Switching in the menu using
and then it displays as below.
Select the Celsius/Fahrenheit Switching using F G button.
Function Code
conversion mode value
K
Press
button to save the setting.
L
Press
button to exit.
h If no button is selected for about 25 seconds after setup, it exits the
setup mode automatically.
Whenever press F G button in Fahrenheit mode, the temperature will increase/drop 2 de-
grees.
❈ Fahrengeit Setting
00 : Celsius
01 : Fahrenheit
B
button
Installation Manual 31
Optional Operation