LG ABNW85GB9A0 Installation Manual page 34

How to Set E.S.P?
Set the ESP value using F G button.
(The ESP value can be set from 1 up to 255,
and 1 is the smallest value and 255 is the largest value.)
Select a fan speed again using F G button, and set the ESP value for each speed.
Ex) 120 set for Breeze
Ex) 230 set for High
K
Press button to save the setting.
L
Press button to exit.
h If no button is selected for about 25 seconds after setup, it exits the setup mode automatically.
K
h If the
button is not selected before you exit, the changes will not apply.
• Pay special attention not to mix the ESP values for each speed.
• Some product may not allow you to program for Breeze and Power speed.
• The programmable ESP value may vary according to the product and capacity.
• When a power failure compensation is completed after power is on (at least 1 minute),
Please set or check the ESP value.
34
(ESP value for Breeze : 120)
(ESP value for High : 230)