Installer Setting -Optional Function Setting
Setting feature for indoor unit when air cleaning / heater / humidifier / Up/down grill / Ventilation
KIT /Auxiliary Heater is newly installed, or installed unit is removed.
If pressing
button long for 3
1
seconds, it enters into remote controller
setter setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If pressing
button repeatedly, it moves to the
2
selected option function code as picture below.
Select existing condition of
3
each mode by pressing
button.
(00: not installed,
01 : installed)
Function Code Existing condition
Press
button to save.
4
5
Pressing
button will exit settings mode.
❈ After setup, it automatically gets out of setup
mode if there is no button input for 25
seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.
OPTIONAL OPERATION
Function
Plasma purification
Electric heater
Dehumidifier
Elevation grill
Ventilation kit
Auxiliary heater
31
Code
20
21
22
23
24
25