Installer Setting - Setting Address Of Central Control - LG ABNW85GB9A0 Installation Manual

Installer Setting - Setting Address of Central Control

This function is to be used when connecting to a central controller.
See the central controller manual for more detailed functions.
B
Press and hold button for more than 3 seconds to enter the installer settings mode.
- If pressing only once briefly, it will enter the user settings mode.
Make sure to press and hold for more than 3 seconds.
Once entered the address setting mode using
Set the group No. using F G button. (0~F)
Move to the indoor unit No. set value using H I button.
Set the indoor unit No. value using F G button. (0~F)
K
Press button to complete the address setting.
L
Press button to exit.
h If no button is selected for about 25 seconds after setup, it exits the setup mode automatically.
K
h If the
button is not selected before you exit, the changes will not apply.
B
button, it displays as below.
Code value Indoor unit number
Group number
Optional Operation
Installation Manual 27