Optional Operation
Optional Operation
Installer Setting -Test Run Mode
A test run must be performed after installation.
See the product manual for more details about test run.
B
Press and hold
button for more than 3 seconds to enter the installer settings mode.
- If pressing only once briefly, it will enter the user settings mode.
Make sure to press and hold for more than 3 seconds.
- For the wall-mount product, cancel the wind direction left/right.
The set value '01' will blink in the lower part of display window.
Select the test run mode using F G button.
Test run
Set value
code value
K
Press
button to start test run.
<When cooling>
During a test run, press the button below to cancel the test run.
- Operation selection, temperature up/down, fan speed, Airflow, run/stop button
26
Code value
❈ Test run mode value
00 : Cooling test run
01 : Heating test run
<When heating>
Set value