ACME FARANDOLE AM-BAR User Manual page 8

DMX State
Select the , press the ENTER button. Use the DOWN and UP button to select
or (Hold). Once selected, press the ENTER button to setup or exit menu mode without any
change after 1 minute. Back to the functions without any change, press the MENU button.
Dimmer Curve
Select the , press the ENTER button. Use the DOWN and UP button to select
Curve 1) ... (Dimmer Curve 4). Once selected, press the ENTER button to setup or exit menu
mode without any change after 1 minutes. Back to the functions without any change, press the
MENU button.
Dimmer curve 1
Optically Linear
Mode 1(Optically Linear): The increase in light intensity appears to be linear as DMX value is increased.
Mode 2(Square Law): Light intensity control is finer at low levels and coarser at high levels.
Mode 3(Inverse Square Law): Light intensity control is coarser at low levels and finger at high levels.
Mode 4(S-curve): Light intensity control is finger at low levels and high levels and coarser at medium
levels.
Dimmer Speed
Select the , press the ENTER button. Use the DOWN and UP button to select
or (Smooth). Once selected, press the ENTER button to setup or exit menu mode without
any change after 1 minute. Back to the functions without any change, press the MENU button.
Dimmer curve 2
Square Law
7A
Dimmer curve 3
Inverse-Square Law
(Blackout)
(Dimmer
Dimmer curve 4
S-Curve
(Fast)