ACME FARANDOLE AM-BAR User Manual page 9

Table of Contents

Display Inverse

Select the

, press the ENTER button. Use the DOWN and UP button to select

. Once selected, press the ENTER button to setup or exit menu mode without any change after

1 minute automatically. Back to the functions without any change, press the MENU button.

White Balance

Select the

, press the ENTER button. Use the DOWN and UP button to select

. Once selected, press the ENTER button to setup, use the DOWN and UP button to adjust

the value from 125 to 255, press the ENTER button to setup or exit menu mode without any change

after 1 minute automatically. Back to the functions without any change, press the MENU button.

Manual Test

Select the

, press the ENTER button. Use the DOWN and UP button to select

setup, use the DOWN and UP button to adjust the value from 0 to 255, press the ENTER button to

setup or exit menu mode without any change after 1 minute automatically. Back to the functions

without any change, press the MENU button.

Auto Test

Select the

, press the ENTER button and the unit will run self-test by built-in program. To go

back to the functions, press the MENU button.

Temperature

Select the

, press the ENTER button and the display will show the temperature of each unit. To

go back to the functions, press the MENU button.

Fixture Hours

Select the

, press the ENTER button and the display will show the working hours of the unit. To

go back to the functions, press the MENU button.

. Once selected, press the ENTER button to

Table of Contents