Function For Installer - Factory Default Password - Laipac LP-1500 Owner's Manual

Wireless home safety and security system
Table of Contents

Advertisement

Place the rechargeable battery to the proper position
Function for Installer – Factory Default Password :123456
1. Enter password to start the menu. LCD shown as below(Enter the password and do
the function setting according to your need)
Incorrect password entering will show " Access Denied" and will emit beep sound
warning.
If 3 incorrect password enters, keyboard disabled and locked (LCD shown as
below). Try it again after one minute idle or use Remote Control Handset (LP-119
DISARM button) to disarm the system.
If 9 incorrect password enters, (equals has 3 times keyboard locked, system
disabled and locked, LCD shown as below). It will trigger alarm but not to dial out
the phone number. you can use Remote Control Handset (LP-119 DISARM
button) to disarm the system.
2. If the password is correct (default 123456), It will have beep sound and LCD panel
shown as below.
Code : ******
Pass
Install Mode
Access Denied
HOME SECURITY
KEYBOARD LOCKED
System Lock
8

Advertisement

Table of Contents
loading

Table of Contents